Home » Products » TSS Series Twin Screw Extrusion Machine » TSS-75 Extrusion Machine
inquiry form
TSS-75

Twin Screw Extrusion Machine

The screw and barrel are designed on the basis of modularization concept. Customer can use them in different combinations according to the technique requirements. The bimetal barrel of the TSS-75 high performance twin screw extruder has a water-cooling system. The screw element, which has deep troughs at both sides, is made of high-speed tool steel (6542). The steel is hardened with vacuum quenching technique, and the hardness could reach HRC 58-65. When the screw element is connecting with core shaft in involute spline form, the hardness of both the screw element and the core shaft is enhanced accordingly. Thus the twin screw extrusion machine can run at a higher speed.

The form below showed the parameters of all the products belonging to TSS twin screw extrusion unit, while the highlighted part is for TSS-75 high performance twin screw extruder. Custom products are all available based on your requirements for production capacity, material and so on. Contact us and you are sure to get what you are looking for.

Type Diameter(mm) L/D Screw speed(r/min) Power(kw) Torque grade(N·m) Specific torque(T/A3) Capacity(kg/h)
TSS-52 51.4 32~68 500 75 688 8.6 225~375
600 90 688 8.6 270~450
500 90 825 10.4 270~450
600 110 825 10.4 330~550
TSS-65 62.4 32~68 500 132 1210 8.6 396~660
600 160 1222 8.7 480~800
500 160 1467 10.4 480~800
600 200 1528 10.9 600~1000
TSS-75 71 32~68 500 200 1340 8.5 600~1000
600 250 1910 8.8 750~1250
500 250 2292 10.6 750~1250
600 315 2407 11.1 945~1575
TSS-95 93 32~68 500 450 4126 8.7 1350~2250
600 550 4202 8.6 1650~2750
500 550 5043 10.6 1650~2750
Inquiry Form